diff --git a/.env.example b/.env.example new file mode 100644 index 0000000..f2e98c3 --- /dev/null +++ b/.env.example @@ -0,0 +1,12 @@ +# Base configuration +PUID= +PGID= +MEDIA_DIRECTORY= +INSTALL_LOCATION= +MEDIA_SERVICE= + +# VPN configuration +VPN_ENABLED= +VPN_SERVICE= +VPN_USER= +VPN_PASSWORD= diff --git a/docker-compose.custom.yaml b/docker-compose.custom.yaml new file mode 100644 index 0000000..236a651 --- /dev/null +++ b/docker-compose.custom.yaml @@ -0,0 +1,4 @@ +version: "3" + +# services: + # Add your custom services here! diff --git a/docker-compose.example.yaml b/docker-compose.example.yaml index 0f2c82a..be3ec04 100644 --- a/docker-compose.example.yaml +++ b/docker-compose.example.yaml @@ -3,17 +3,17 @@ version: "3" services: # is used to serve your media to the client devices : - image: lscr.io/linuxserver/ - container_name: + image: lscr.io/linuxserver/${MEDIA_SERVICE} + container_name: ${MEDIA_SERVICE} #network_mode: host # plex environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} - VERSION=docker volumes: - - /movies:/data/movies - - /tvshows:/data/tvshows - - /config/:/config + - ${MEDIA_DIRECTORY}/movies:/data/movies + - ${MEDIA_DIRECTORY}/tvshows:/data/tvshows + - ${INSTALL_LOCATION}/config/${MEDIA_SERVICE}:/config ports: - 8096:8096 restart: unless-stopped @@ -23,12 +23,12 @@ services: image: lscr.io/linuxserver/qbittorrent container_name: qbittorrent environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} - WEB_UI_PORT=8080 volumes: - - /downloads:/downloads - - /config/qbittorrent:/config + - ${MEDIA_DIRECTORY}/downloads:/downloads + - ${INSTALL_LOCATION}/config/qbittorrent:/config restart: unless-stopped ports: # qbittorrent - 8080:8080 # qbittorrent @@ -40,12 +40,12 @@ services: image: lscr.io/linuxserver/sonarr container_name: sonarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /tvshows:/tv - - /downloads:/downloads - - /config/sonarr:/config + - ${MEDIA_DIRECTORY}/tvshows:/tv + - ${MEDIA_DIRECTORY}/downloads:/downloads + - ${INSTALL_LOCATION}/config/sonarr:/config ports: - 8989:8989 restart: unless-stopped @@ -56,12 +56,12 @@ services: image: lscr.io/linuxserver/radarr container_name: radarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /movies:/movies - - /downloads:/downloads - - /config/radarr:/config + - ${MEDIA_DIRECTORY}/movies:/movies + - ${MEDIA_DIRECTORY}/downloads:/downloads + - ${INSTALL_LOCATION}/config/radarr:/config ports: - 7878:7878 restart: unless-stopped @@ -72,12 +72,12 @@ services: image: lscr.io/linuxserver/lidarr container_name: lidarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /music:/music - - /downloads:/downloads - - /config/lidarr:/config + - ${MEDIA_DIRECTORY}/music:/music + - ${MEDIA_DIRECTORY}/downloads:/downloads + - ${INSTALL_LOCATION}/config/lidarr:/config ports: - 8686:8686 restart: unless-stopped @@ -88,12 +88,12 @@ services: image: lscr.io/linuxserver/readarr:develop container_name: readarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /books:/books - - /downloads:/downloads - - /config/readarr:/config + - ${MEDIA_DIRECTORY}/books:/books + - ${MEDIA_DIRECTORY}/downloads:/downloads + - ${INSTALL_LOCATION}/config/readarr:/config ports: - 8787:8787 restart: unless-stopped @@ -104,12 +104,12 @@ services: image: lscr.io/linuxserver/bazarr container_name: bazarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /movies:/movies - - /tvshows:/tv - - /config/bazarr:/config + - ${MEDIA_DIRECTORY}/movies:/movies + - ${MEDIA_DIRECTORY}/tvshows:/tv + - ${INSTALL_LOCATION}/config/bazarr:/config ports: - 6767:6767 restart: unless-stopped @@ -120,10 +120,10 @@ services: image: lscr.io/linuxserver/prowlarr container_name: prowlarr environment: - - PUID= - - PGID= + - PUID=${PUID} + - PGID=${PGID} volumes: - - /config/prowlarr:/config + - ${INSTALL_LOCATION}/config/prowlarr:/config ports: - 9696:9696 restart: unless-stopped @@ -142,13 +142,12 @@ services: - 8388:8388/udp # Shadowsocks #- 8080:8080/tcp # gluetun volumes: - - /config/gluetun:/config + - ${INSTALL_LOCATION}/config/gluetun:/config environment: - - VPN_SERVICE_PROVIDER= + - VPN_SERVICE_PROVIDER=${VPN_SERVICE} - VPN_TYPE=openvpn - - OPENVPN_USER= - - OPENVPN_PASSWORD= - - SERVER_COUNTRIES= + - OPENVPN_USER=${VPN_USER} + - OPENVPN_PASSWORD=${VPN_PASSWORD} - OPENVPN_CIPHERS=AES-256-GCM restart: unless-stopped @@ -161,7 +160,7 @@ services: volumes: - /etc/localtime:/etc/localtime:ro - /var/run/docker.sock:/var/run/docker.sock:ro - - /config/portainer:/data + - ${INSTALL_LOCATION}/config/portainer:/data restart: unless-stopped # Watchtower is going to keep our instances updated diff --git a/docs.org b/docs.org new file mode 100644 index 0000000..301c4e0 --- /dev/null +++ b/docs.org @@ -0,0 +1,530 @@ +#+title: Docs +#+PROPERTY: header-args :tangle setup.sh +#+auto_tangle: t + +* Table of contents :toc: +:PROPERTIES: +:ID: faf95c8a-9133-4072-8544-0ef456a67611 +:END: + +- [[#welcome-message][Welcome message]] +- [[#functions][Functions]] + - [[#message-formatting][Message formatting]] + - [[#check-the-dependencies][Check the dependencies]] + - [[#running-services-location][Running services location]] +- [[#verify-all-the-dependencies][Verify all the dependencies]] +- [[#gather-all-the-required-information][Gather all the required information]] + - [[#checking-install-location][Checking install location]] + - [[#setting-the-correct-user][Setting the correct user]] + - [[#media-directory][Media directory]] + - [[#setting-perferred-media-service][Setting perferred media service]] + - [[#setting-the-vpn][Setting the VPN]] +- [[#installing-yams][Installing YAMS]] + - [[#copy-the-docker-compose-file-to-the-install-location][Copy the docker-compose file to the install location]] + - [[#set-puid-pgid-media-folder-media-service-config-folder-and-vpn-on-the-yams-scripts][Set PUID, PGID, Media Folder, Media Service, Config folder and VPN on the YAMS scripts]] + - [[#set-the-configuration-for-the-yams-binary][Set the configuration for the YAMS binary]] + - [[#success-message][Success message!]] +- [[#final-steps][Final steps]] + - [[#install-the-yams-cli][Install the YAMS CLI]] + - [[#set-the-correct-permissions-to-the-media-and-install-directories][Set the correct permissions to the media and install directories]] + - [[#create-the-config-directory][Create the config directory]] +- [[#display-closing-message][Display closing message]] + +* Welcome message +:PROPERTIES: +:ID: 525c03eb-cab9-44f8-8cc5-e5ec9035a938 +:END: + +This is just a welcome message for the script + +#+begin_src bash +#!/bin/bash +set -euo pipefail + +printf "\033c" +echo "====================================================" +echo " ___ ___ ___ " +echo " ___ / /\ /__/\ / /\ " +echo " /__/| / /::\ | |::\ / /:/_ " +echo " | |:| / /:/\:\ | |:|:\ / /:/ /\ " +echo " | |:| / /:/~/::\ __|__|:|\:\ / /:/ /::\\" +echo " __|__|:| /__/:/ /:/\:\ /__/::::| \:\ /__/:/ /:/\:\\" +echo "/__/::::\ \ \:\/:/__\/ \ \:\~~\__\/ \ \:\/:/~/:/" +echo " ~\~~\:\ \ \::/ \ \:\ \ \::/ /:/ " +echo " \ \:\ \ \:\ \ \:\ \__\/ /:/ " +echo " \__\/ \ \:\ \ \:\ /__/:/ " +echo " \__\/ \__\/ \__\/ " +echo "====================================================" +echo "Welcome to YAMS (Yet Another Media Server)" +echo "Installation process should be really quick" +echo "We just need you to answer some questions" +echo "We are going to ask for your sudo password in the end" +echo "To finish the installation of the CLI" +echo "====================================================" +echo "" +#+end_src + +* Functions +:PROPERTIES: +:ID: 111a7df4-08f5-4e6c-a799-dd822c5d030e +:END: + +To make development easier, we declare some functions that are going to be used a lot later + +** Message formatting +:PROPERTIES: +:ID: 61387bd4-2ecf-44fe-ac69-dc6347c0d1b8 +:END: +Both of these functions format the message in different colors, depending on what the message means +*** Success +:PROPERTIES: +:ID: ec8f113c-43f9-4585-a1b5-8c7ec4e84bb2 +:END: + +#+begin_src bash +send_success_message() { + echo -e $(printf "\e[32m$1\e[0m") +} +#+end_src + +*** Error +:PROPERTIES: +:ID: 1a6cd951-c9ce-46fc-8953-f5e206f7cd23 +:END: + +Error is basically the same as before, but it ~exit 255~ to finish the execution. + +#+begin_src bash +send_error_message() { + echo -e $(printf "\e[31m$1\e[0m") + exit 255 +} +#+end_src + +** Check the dependencies +:PROPERTIES: +:ID: e7d01eeb-c7ef-42ff-b60d-010be30bc6a8 +:END: + +This function verifies that the dependencies are installed. ~Docker~ and ~docker-compose~ are required +for YAMS to work. + +#+begin_src bash +check_dependencides() { + if command -v "$1" &> /dev/null; then + send_success_message "$1 exists ✅ " + else + echo -e $(printf "\e[31m ⚠️ $1 not found! ⚠️\e[0m") + read -p "Do you want YAMS to install docker and docker-compose? IT ONLY WORKS ON DEBIAN AND UBUNTU! [y/N]: " install_docker + install_docker=${install_docker:-"n"} + + if [ "$install_docker" == "y" ]; then + bash ./docker.sh + else + send_error_message "Install docker and docker-compose and come back later!" + fi + fi +} +#+end_src + +** Running services location +:PROPERTIES: +:ID: 53213557-edfe-4da7-88c0-e0e202429116 +:END: + +This function just displays the locations for every container so the user can access to it when YAMS +finish installing. + +#+begin_src bash +running_services_location() { + host_ip=$(hostname -I | awk '{ print $1 }') + + services=( + "qBittorrent:8080" + "Radarr:7878" + "Sonarr:8989" + "Lidarr:8686" + "Readarr:8787" + "Prowlarr:9696" + "Bazarr:6767" + "$media_service:$media_service_port" + "Portainer:9000" + ) + + echo -e "Service URLs:" + for service in "${services[@]}"; do + service_name="${service%%:*}" + service_port="${service##*:}" + echo "$service_name: http://$host_ip:$service_port/" + done +} +#+end_src + +* Verify all the dependencies +:PROPERTIES: +:ID: e945d5a8-5142-41fe-8175-96de7aa84cf2 +:END: + +#+begin_src bash +echo "Checking prerequisites..." + + +check_dependencides "docker" +check_dependencides "docker-compose" + +if [[ "$EUID" = 0 ]]; then + send_error_message "YAMS has to run without sudo! Please, run it again with regular permissions" +fi +#+end_src + +* Gather all the required information +:PROPERTIES: +:ID: 438cecef-2bd6-4d7c-b429-6c674ae311d9 +:END: +** Checking install location +:PROPERTIES: +:ID: fff12355-9d79-40fe-a540-cfba2a176a3e +:END: + +#+begin_src bash +default_install_directory="/opt/yams" + +read -p "Where do you want to install the docker-compose file? [$default_install_directory]: " install_directory +install_directory=${install_directory:-$default_install_directory} + +if [ ! -d "$install_directory" ]; then + echo "The directory \"$install_directory\" does not exists. Attempting to create..." + if mkdir -p "$install_directory"; then + send_success_message "Directory $install_directory created ✅" + else + send_error_message "There was an error creating the installation directory at \"$install_directory\". Make sure you have the necessary permissions ❌" + fi +fi + +filename="$install_directory/docker-compose.yaml" +custom_file_filename="$install_directory/docker-compose.custom.yaml" +env_file="$install_directory/.env" +#+end_src + +** Setting the correct user +:PROPERTIES: +:ID: 7428d7b7-aec5-4638-b370-84e9055fb412 +:END: + +#+begin_src bash +read -p "What's the user that is going to own the media server files? [$USER]: " username +username=${username:-$USER} + +if id -u "$username" &>/dev/null; then + puid=$(id -u "$username"); + pgid=$(id -g "$username"); +else + send_error_message "The user \"$username\" doesn't exist!" +fi +#+end_src + +** Media directory +:PROPERTIES: +:ID: 9726dead-8833-4f23-98b8-2790d72605de +:END: + +#+begin_src bash +read -p "Please, input your media directory [/srv/media]: " media_directory +media_directory=${media_directory:-"/srv/media"} + +read -p "Are you sure your media directory is \"$media_directory\"? [y/N]: " media_directory_correct +media_directory_correct=${media_directory_correct:-"n"} + +if [ ! -d "$media_directory" ]; then + echo "The directory \"$media_directory\" does not exists. Attempting to create..." + if mkdir -p "$media_directory"; then + send_success_message "Directory $media_directory created ✅" + else + send_error_message "There was an error creating the installation directory at \"$media_directory\". Make sure you have the necessary permissions ❌" + fi +fi + +if [ "$media_directory_correct" == "n" ]; then + send_error_message "Media directory is not correct. Please fix it and run the script again ❌" +fi +#+end_src + +** Setting perferred media service +:PROPERTIES: +:ID: 3af8dbed-3a88-4739-a721-6434993c0b67 +:END: + +#+begin_src bash +echo -e "\n\n\nTime to choose your media service." +echo "Your media service is responsible for serving your files to your network." +echo "By default, YAMS supports 3 media services:" +echo "- jellyfin (recommended, easier)" +echo "- emby" +echo "- plex (advanced, always online)" + +read -p "Choose your media service [jellyfin]: " media_service +media_service=${media_service:-"jellyfin"} +media_service=$(echo "$media_service" | awk '{print tolower($0)}') + +media_service_port=8096 +if [ "$media_service" == "plex" ]; then + media_service_port=32400 +fi + +if echo "emby plex jellyfin" | grep -qw "$media_service"; then + echo -e "\nYAMS is going to install \"$media_service\" on port \"$media_service_port\"" +else + send_error_message "\"$media_service\" is not supported by YAMS. Are you sure you chose the correct service?" +fi +#+end_src + +** Setting the VPN +:PROPERTIES: +:ID: 1da4fe67-ee20-4b70-8f36-4a9f7161b6ca +:END: + +#+begin_src bash +echo -e "\nTime to set up the VPN." +echo "You can check the supported VPN list here: https://yams.media/advanced/vpn." + +read -p "Do you want to configure a VPN? [Y/n]: " setup_vpn +setup_vpn=${setup_vpn:-"y"} + +if [ "$setup_vpn" == "y" ]; then + read -p "What's your VPN service? (with spaces) [mullvad]: " vpn_service + vpn_service=${vpn_service:-"mullvad"} + + echo -e "\nYou should read $vpn_service's documentation in case it has different configurations for username and password." + echo "The documentation for $vpn_service is here: https://github.com/qdm12/gluetun-wiki/blob/main/setup/providers/${vpn_service// /-}.md" + + read -p "What's your VPN username? (without spaces): " vpn_user + + unset vpn_password + charcount=0 + prompt="What's your VPN password? (if you are using mullvad, just enter your username again): " + while IFS= read -p "$prompt" -r -s -n 1 char + do + if [[ $char == $'\0' ]] + then + break + fi + if [[ $char == $'\177' ]] ; then + if [ $charcount -gt 0 ] ; then + charcount=$((charcount-1)) + prompt=$'\b \b' + vpn_password="${vpn_password%?}" + else + prompt='' + fi + else + charcount=$((charcount+1)) + prompt='*' + vpn_password+="$char" + fi + done + echo +fi + +echo "Configuring the docker-compose file for the user \"$username\" on \"$install_directory\"..." +#+end_src + +* Installing YAMS +:PROPERTIES: +:ID: 44e5f3f1-3ae7-4f88-ba96-8149c9980fb2 +:END: +** Copy the docker-compose file to the install location +:PROPERTIES: +:ID: 09018e25-ed48-46e9-85c3-586c37844c11 +:END: + +#+begin_src bash +copy_files=( + "docker-compose.example.yaml:$filename" + ".env.example:$env_file" + "docker-compose.custom.yaml:$custom_file_filename" +) + +for file_mapping in "${copy_files[@]}"; do + source_file="${file_mapping%%:*}" + destination_file="${file_mapping##*:}" + + echo -e "\nCopying $source_file to $destination_file..." + if cp "$source_file" "$destination_file"; then + send_success_message "$source_file was copied successfuly! ✅" + else + send_error_message "Failed to copy $source_file to $destination_file. Ensure your user ($USER) has the necessary permissions ❌" + fi +done +#+end_src + +#+RESULTS: + +** Set PUID, PGID, Media Folder, Media Service, Config folder and VPN on the YAMS scripts +:PROPERTIES: +:ID: 3d169001-f0f7-477f-a954-0460484f4b43 +:END: + +This steps prepares all the files with the correct information that was collected on the "[[#gather-all-the-required-information][Gather all the +required information]]" step. + +#+begin_src bash +sed -i -e "s||$puid|g" "$env_file" \ + -e "s||$pgid|g" "$env_file" \ + -e "s||$media_directory|g" "$env_file" \ + -e "s||$media_service|g" "$env_file" \ + -e "s||$media_service|g" "$filename" + +if [ "$media_service" == "plex" ]; then + sed -i -e "s|#network_mode: host # plex|network_mode: host # plex|g" "$filename" +fi + +sed -i -e "s||$install_directory|g" "$env_file" + +if [ "$setup_vpn" == "y" ]; then + sed -i -e "s||$vpn_service|g" "$env_file" \ + -e "s||$vpn_user|g" "$env_file" \ + -e "s||$vpn_password|g" "$env_file" \ + -e "s||$setup_vpn|g" "$env_file" \ + -e "s|#network_mode: \"service:gluetun\"|network_mode: \"service:gluetun\"|g" "$filename" \ + -e "s|ports: # qbittorrent|#port: # qbittorrent|g" "$filename" \ + -e "s|- 8080:8080 # qbittorrent|#- 8080:8080 # qbittorrent|g" "$filename" \ + -e "s|#- 8080:8080/tcp # gluetun|- 8080:8080/tcp # gluetun|g" "$filename" +fi +#+end_src + +** Set the configuration for the YAMS binary +:PROPERTIES: +:ID: b6a8732f-9dbe-4d93-b04d-27156eacdea2 +:END: + +#+begin_src bash +sed -i -e "s||$filename|g" yams \ + -e "s||$custom_file_filename|g" yams \ + -e "s||$install_directory|g" yams +#+end_src + +** Success message! +:PROPERTIES: +:ID: 7b0ed8f5-780b-4685-8123-8d5c4229eaba +:END: + +Finally, YAMS is installed 🔥. Show the success message + +#+begin_src bash +send_success_message "Everything installed correctly! 🎉" + +echo "Running the server..." +echo "This is going to take a while..." + +docker-compose -f "$filename" up -d +#+end_src +* Final steps +:PROPERTIES: +:ID: 65ce5828-b69a-4a0e-83f6-b029e19caea1 +:END: +** Install the YAMS CLI +:PROPERTIES: +:ID: f4f9d166-8a2b-4d79-bc7f-fe73ecf5fb77 +:END: + +This steps requires ~sudo~ because it's copying the main yams script to the ~/usr/local/bin/yams~ +directory. + +#+begin_src bash +echo -e "\nWe need your sudo password to install the YAMS CLI and configure permissions..." + +if sudo cp yams /usr/local/bin/yams && sudo chmod +x /usr/local/bin/yams; then + send_success_message "YAMS CLI installed successfully ✅" +else + send_error_message "Failed to install YAMS CLI. Make sure you have the necessary permissions ❌" +fi +#+end_src + +** Set the correct permissions to the media and install directories +:PROPERTIES: +:ID: 4cfb9397-776d-46db-84cc-54b78395cba8 +:END: + +This adds the correct permissions to the media folder, in case they are not correct. + +#+begin_src bash +if sudo chown -R "$puid":"$pgid" "$media_directory"; then + send_success_message "Media directory ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the media directory. Check permissions ❌" +fi + +if sudo chown -R "$puid":"$pgid" "$install_directory"; then + send_success_message "Install directory ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the install directory. Check permissions ❌" +fi +#+end_src + +** Create the config directory +:PROPERTIES: +:ID: 699f35fe-edde-406d-be0b-3ff2eaa6d7eb +:END: + +This is where all the configurations are going to be saved. If it doesn't it will try and create it. If +it can't be created, we'll raise an error. + +#+begin_src bash +if [[ -d "$install_directory/config" ]]; then + send_success_message "Configuration folder \"$install_directory/config\" exists ✅" +else + if sudo mkdir -p "$install_directory/config"; then + send_success_message "Configuration folder \"$install_directory/config\" created ✅" + else + send_error_message "Failed to create or access the configuration folder. Check permissions ❌" + fi +fi + +if sudo chown -R "$puid":"$pgid" "$install_directory/config"; then + send_success_message "Configuration folder ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the configuration folder. Check permissions ❌" +fi +#+end_src + +* Display closing message +:PROPERTIES: +:ID: 238e3eae-9df7-4a7f-a460-7a61c07b5442 +:END: + +#+begin_src bash +printf "\033c" + +echo "========================================================" +echo " _____ ___ ___ ___ " +echo " / /::\ / /\ /__/\ / /\ " +echo " / /:/\:\ / /::\ \ \:\ / /:/_ " +echo " / /:/ \:\ / /:/\:\ \ \:\ / /:/ /\ " +echo " /__/:/ \__\:| / /:/ \:\ _____\__\:\ / /:/ /:/_ " +echo " \ \:\ / /:/ /__/:/ \__\:\ /__/::::::::\ /__/:/ /:/ /\\" +echo " \ \:\ /:/ \ \:\ / /:/ \ \:\~~\~~\/ \ \:\/:/ /:/" +echo " \ \:\/:/ \ \:\ /:/ \ \:\ ~~~ \ \::/ /:/ " +echo " \ \::/ \ \:\/:/ \ \:\ \ \:\/:/ " +echo " \__\/ \ \::/ \ \:\ \ \::/ " +echo " \__\/ \__\/ \__\/ " +echo "========================================================" +send_success_message "All done!✅ Enjoy YAMS!" +echo "You can check the installation on $install_directory" +echo "========================================================" +echo "Everything should be running now! To check everything running, go to:" +echo +running_services_location +echo +echo +echo "You might need to wait for a couple of minutes while everything gets up and running" +echo +echo "All the services location are also saved in ~/yams_services.txt" +running_services_location > ~/yams_services.txt +echo "========================================================" +echo +echo "To configure YAMS, check the documentation at" +echo "https://yams.media/config" +echo +echo "========================================================" +exit 0 +#+end_src diff --git a/install.sh b/install.sh index 2a14084..2b92f65 100755 --- a/install.sh +++ b/install.sh @@ -1,300 +1,5 @@ #!/bin/bash -set -euo pipefail -printf "\033c" -echo "====================================================" -echo " ___ ___ ___ " -echo " ___ / /\ /__/\ / /\ " -echo " /__/| / /::\ | |::\ / /:/_ " -echo " | |:| / /:/\:\ | |:|:\ / /:/ /\ " -echo " | |:| / /:/~/::\ __|__|:|\:\ / /:/ /::\\" -echo " __|__|:| /__/:/ /:/\:\ /__/::::| \:\ /__/:/ /:/\:\\" -echo "/__/::::\ \ \:\/:/__\/ \ \:\~~\__\/ \ \:\/:/~/:/" -echo " ~\~~\:\ \ \::/ \ \:\ \ \::/ /:/ " -echo " \ \:\ \ \:\ \ \:\ \__\/ /:/ " -echo " \__\/ \ \:\ \ \:\ /__/:/ " -echo " \__\/ \__\/ \__\/ " -echo "====================================================" -echo "Welcome to YAMS (Yet Another Media Server)" -echo "Installation process should be really quick" -echo "We just need you to answer some questions" -echo "We are going to ask for your sudo password in the end" -echo "To finish the installation of the CLI" -echo "====================================================" -echo "" - -# ============================================================================================ -# Functions to ease development -# ============================================================================================ - -send_success_message() { - echo -e $(printf "\e[32m$1\e[0m") -} - -send_error_message() { - echo -e $(printf "\e[31m$1\e[0m") - exit 255 -} - -check_dependencides() { - if command -v $1 &> /dev/null; then - send_success_message "$1 exists ✅ " - else - echo -e $(printf "\e[31m ⚠️ $1 not found! ⚠️\e[0m") - read -p "Do you want YAMS to install docker and docker-compose? IT ONLY WORKS ON DEBIAN AND UBUNTU! [y/N]: " install_docker - install_docker=${install_docker:-"n"} - - if [ "$install_docker" == "y" ]; then - bash ./docker.sh - else - send_error_message "Install docker and docker-compose and come back later!" - fi - fi -} - -running_services_location() { - host_ip=$(hostname -I | awk '{ print $1 }') - echo "qBittorrent: http://$host_ip:8080/" - echo "Radarr: http://$host_ip:7878/" - echo "Sonarr: http://$host_ip:8989/" - echo "Lidarr: http://$host_ip:8686/" - echo "Readarr: http://$host_ip:8787/" - echo "Prowlarr: http://$host_ip:9696/" - echo "Bazarr: http://$host_ip:6767/" - echo "$media_service: http://$host_ip:$media_service_port/" - echo "Portainer: http://$host_ip:9000/" -} - -# ============================================================================================ -# Check all the prerequisites are installed before continuing -# ============================================================================================ -echo "Checking prerequisites..." - - -check_dependencides "docker" -check_dependencides "docker-compose" - -if [[ "$EUID" = 0 ]]; then - send_error_message "YAMS has to run without sudo! Please, run it again with regular permissions" -fi - -# ============================================================================================ - -# ============================================================================================ -# Gathering information -# ============================================================================================ -read -p "Where do you want to install the docker-compose file? [/opt/yams]: " install_location - -# Checking if the install_location exists -install_location=${install_location:-/opt/yams} -[[ -f "$install_location" ]] || mkdir -p "$install_location" || send_error_message "There was an error with your install location! Make sure the directory exists and the user \"$USER\" has permissions on it" -install_location=$(realpath "$install_location") -filename="$install_location/docker-compose.yaml" - -read -p "What's the user that is going to own the media server files? [$USER]: " username - -# Checking that the user exists -username=${username:-$USER} - -if id -u "$username" &>/dev/null; then - puid=$(id -u "$username"); - pgid=$(id -g "$username"); -else - send_error_message "The user \"$username\" doesn't exist!" -fi - -read -p "Please, input your media folder [/srv/media]: " media_folder -media_folder=${media_folder:-"/srv/media"} - -# Checking that the media folder exists - -realpath "$media_folder" &>/dev/null || send_error_message "There was an error with your media folder! The directory \"$media_folder\" does not exist!" - -media_folder=$(realpath "$media_folder") - -read -p "Are you sure your media folder is \"$media_folder\"? [y/N]: " media_folder_correct -media_folder_correct=${media_folder_correct:-"n"} - -if [ "$media_folder_correct" == "n" ]; then - send_error_message "Media folder is not correct. Please, fix it and run the script again" -fi - -# Setting the preferred media service -echo -echo -echo -echo "Time to choose your media service." -echo "Your media service is the one responsible for serving your files to your network." -echo "By default, YAMS support 3 media services:" -echo "- jellyfin (recommended, easier)" -echo "- emby" -echo "- plex (advanced, always online)" -read -p "Choose your media service [jellyfin]: " media_service -media_service=${media_service:-"jellyfin"} -media_service=$(echo "$media_service" | sed -e 's/\(.*\)/\L\1/') - -media_service_port=8096 -if [ "$media_service" == "plex" ]; then - media_service_port=32400 -fi - -if echo "emby plex jellyfin" | grep -qw "$media_service"; then - echo "YAMS is going to install \"$media_service\" on port \"$media_service_port\"" -else - send_error_message "\"$media_service\" is not supported by YAMS. Are you sure you chose the correct service?" -fi - -# Adding the VPN -echo -echo -echo -echo "Time to set up the VPN." -echo "You can check the supported VPN list here: https://yams.media/advanced/vpn." -read -p "Do you want to configure a VPN? [Y/n]: " setup_vpn -setup_vpn=${setup_vpn:-"y"} - -if [ "$setup_vpn" == "y" ]; then - read -p "What's your VPN service? (with spaces) [mullvad]: " vpn_service - vpn_service=${vpn_service:-"mullvad"} - echo - echo "You should read $vpn_service's documentation in case it has different configurations for username and password." - echo "The documentation for $vpn_service is here: https://github.com/qdm12/gluetun-wiki/blob/main/setup/providers/${vpn_service// /-}.md" - echo - read -p "What's your VPN username? (without spaces): " vpn_user - - unset vpn_password - charcount=0 - prompt="What's your VPN password? (if you are using mullvad, just enter your username again): " - while IFS= read -p "$prompt" -r -s -n 1 char - do - if [[ $char == $'\0' ]] - then - break - fi - if [[ $char == $'\177' ]] ; then - if [ $charcount -gt 0 ] ; then - charcount=$((charcount-1)) - prompt=$'\b \b' - vpn_password="${vpn_password%?}" - else - prompt='' - fi - else - charcount=$((charcount+1)) - prompt='*' - vpn_password+="$char" - fi - done - echo - - echo "What country do you want to use?" - echo "If you are using: NordVPN, Perfect Privacy, Private Internet Access, VyprVPN, WeVPN or Windscribe, then input a region" - read -p "You can check the countries/regions list for your VPN here: https://github.com/qdm12/gluetun/wiki/$vpn_service#servers [brazil]: " vpn_country - vpn_country=${vpn_country:-"brazil"} -fi - -echo "Configuring the docker-compose file for the user \"$username\" on \"$install_location\"..." -# ============================================================================================ - -# ============================================================================================ -# Actually installing everything! -# ============================================================================================ - -# Copy the docker-compose file from the example to the real one -echo "" -echo "Copying $filename..." - -cp docker-compose.example.yaml "$filename" || send_error_message "Your user ($USER) needs to have permissions on the installation folder!" - -# Set PUID -sed -i -e "s//$puid/g" "$filename" - -# Set PGID -sed -i -e "s//$pgid/g" "$filename" - -# Set media_folder -sed -i -e "s;;$media_folder;g" "$filename" - -# Set media_service -sed -i -e "s;;$media_service;g" "$filename" -if [ "$media_service" == "plex" ]; then - sed -i -e "s;#network_mode: host # plex;network_mode: host # plex;g" "$filename" -fi - -# Set config folder -sed -i -e "s;;$install_location;g" "$filename" - -# Set VPN -if [ "$setup_vpn" == "y" ]; then - sed -i -e "s;;$vpn_service;g" "$filename" - sed -i -e "s;;$vpn_user;g" "$filename" - sed -i -e "s;;$vpn_country;g" "$filename" - sed -i -e "s;;$vpn_password;g" "$filename" - sed -i -e "s;#network_mode: \"service:gluetun\";network_mode: \"service:gluetun\";g" "$filename" - sed -i -e "s;ports: # qbittorrent;#port: # qbittorrent;g" "$filename" - sed -i -e "s;- 8080:8080 # qbittorrent;#- 8080:8080 # qbittorrent;g" "$filename" - sed -i -e "s;#- 8080:8080/tcp # gluetun;- 8080:8080/tcp # gluetun;g" "$filename" - if echo "nordvpn perfect privacy private internet access vyprvpn wevpn windscribe" | grep -qw "$vpn_service"; then - sed -i -e "s;SERVER_COUNTRIES;SERVER_REGIONS;g" "$filename" - fi -fi - -# Set yams script -sed -i -e "s;;$filename;g" yams -sed -i -e "s;;$install_location;g" yams - - -send_success_message "Everything installed correctly! 🎉" - -echo "Running the server..." -echo "This is going to take a while..." - -docker-compose -f "$filename" up -d -# ============================================================================================ - -# ============================================================================================ -# Cleaning up... -# ============================================================================================ - -send_success_message "We need your sudo password to install the yams CLI and correct permissions..." -sudo cp yams /usr/local/bin/yams && sudo chmod +x /usr/local/bin/yams -[[ -f "$media_folder" ]] || sudo mkdir -p "$media_folder" || send_error_message "There was an error with your install location!" -sudo chown -R "$puid":"$pgid" "$media_folder" -[[ -f $install_location/config ]] || sudo mkdir -p "$install_location/config" -sudo chown -R "$puid":"$pgid" "$install_location" - -printf "\033c" - -echo "========================================================" -echo " _____ ___ ___ ___ " -echo " / /::\ / /\ /__/\ / /\ " -echo " / /:/\:\ / /::\ \ \:\ / /:/_ " -echo " / /:/ \:\ / /:/\:\ \ \:\ / /:/ /\ " -echo " /__/:/ \__\:| / /:/ \:\ _____\__\:\ / /:/ /:/_ " -echo " \ \:\ / /:/ /__/:/ \__\:\ /__/::::::::\ /__/:/ /:/ /\\" -echo " \ \:\ /:/ \ \:\ / /:/ \ \:\~~\~~\/ \ \:\/:/ /:/" -echo " \ \:\/:/ \ \:\ /:/ \ \:\ ~~~ \ \::/ /:/ " -echo " \ \::/ \ \:\/:/ \ \:\ \ \:\/:/ " -echo " \__\/ \ \::/ \ \:\ \ \::/ " -echo " \__\/ \__\/ \__\/ " -echo "========================================================" -send_success_message "All done!✅ Enjoy YAMS!" -echo "You can check the installation on $install_location" -echo "========================================================" -echo "Everything should be running now! To check everything running, go to:" -echo -running_services_location -echo -echo -echo "You might need to wait for a couple of minutes while everything gets up and running" -echo -echo "All the services location are also saved in ~/yams_services.txt" -running_services_location > ~/yams_services.txt -echo "========================================================" -echo -echo "To configure YAMS, check the documentation at" -echo "https://yams.media/config" -echo -echo "========================================================" -exit 0 -# ============================================================================================ +git clone https://gitlab.com/rogs/yams.git --depth=1 /tmp/yams > /dev/null 2>&1 +bash /tmp/yams/install.sh +rm -rf /tmp/yams diff --git a/setup.sh b/setup.sh new file mode 100644 index 0000000..802a395 --- /dev/null +++ b/setup.sh @@ -0,0 +1,317 @@ +#!/bin/bash +set -euo pipefail + +printf "\033c" +echo "====================================================" +echo " ___ ___ ___ " +echo " ___ / /\ /__/\ / /\ " +echo " /__/| / /::\ | |::\ / /:/_ " +echo " | |:| / /:/\:\ | |:|:\ / /:/ /\ " +echo " | |:| / /:/~/::\ __|__|:|\:\ / /:/ /::\\" +echo " __|__|:| /__/:/ /:/\:\ /__/::::| \:\ /__/:/ /:/\:\\" +echo "/__/::::\ \ \:\/:/__\/ \ \:\~~\__\/ \ \:\/:/~/:/" +echo " ~\~~\:\ \ \::/ \ \:\ \ \::/ /:/ " +echo " \ \:\ \ \:\ \ \:\ \__\/ /:/ " +echo " \__\/ \ \:\ \ \:\ /__/:/ " +echo " \__\/ \__\/ \__\/ " +echo "====================================================" +echo "Welcome to YAMS (Yet Another Media Server)" +echo "Installation process should be really quick" +echo "We just need you to answer some questions" +echo "We are going to ask for your sudo password in the end" +echo "To finish the installation of the CLI" +echo "====================================================" +echo "" + +send_success_message() { + echo -e $(printf "\e[32m$1\e[0m") +} + +send_error_message() { + echo -e $(printf "\e[31m$1\e[0m") + exit 255 +} + +check_dependencides() { + if command -v "$1" &> /dev/null; then + send_success_message "$1 exists ✅ " + else + echo -e $(printf "\e[31m ⚠️ $1 not found! ⚠️\e[0m") + read -p "Do you want YAMS to install docker and docker-compose? IT ONLY WORKS ON DEBIAN AND UBUNTU! [y/N]: " install_docker + install_docker=${install_docker:-"n"} + + if [ "$install_docker" == "y" ]; then + bash ./docker.sh + else + send_error_message "Install docker and docker-compose and come back later!" + fi + fi +} + +running_services_location() { + host_ip=$(hostname -I | awk '{ print $1 }') + + services=( + "qBittorrent:8080" + "Radarr:7878" + "Sonarr:8989" + "Lidarr:8686" + "Readarr:8787" + "Prowlarr:9696" + "Bazarr:6767" + "$media_service:$media_service_port" + "Portainer:9000" + ) + + echo -e "Service URLs:" + for service in "${services[@]}"; do + service_name="${service%%:*}" + service_port="${service##*:}" + echo "$service_name: http://$host_ip:$service_port/" + done +} + +echo "Checking prerequisites..." + + +check_dependencides "docker" +check_dependencides "docker-compose" + +if [[ "$EUID" = 0 ]]; then + send_error_message "YAMS has to run without sudo! Please, run it again with regular permissions" +fi + +default_install_directory="/opt/yams" + +read -p "Where do you want to install the docker-compose file? [$default_install_directory]: " install_directory +install_directory=${install_directory:-$default_install_directory} + +if [ ! -d "$install_directory" ]; then + echo "The directory \"$install_directory\" does not exists. Attempting to create..." + if mkdir -p "$install_directory"; then + send_success_message "Directory $install_directory created ✅" + else + send_error_message "There was an error creating the installation directory at \"$install_directory\". Make sure you have the necessary permissions ❌" + fi +fi + +filename="$install_directory/docker-compose.yaml" +custom_file_filename="$install_directory/docker-compose.custom.yaml" +env_file="$install_directory/.env" + +read -p "What's the user that is going to own the media server files? [$USER]: " username +username=${username:-$USER} + +if id -u "$username" &>/dev/null; then + puid=$(id -u "$username"); + pgid=$(id -g "$username"); +else + send_error_message "The user \"$username\" doesn't exist!" +fi + +read -p "Please, input your media directory [/srv/media]: " media_directory +media_directory=${media_directory:-"/srv/media"} + +read -p "Are you sure your media directory is \"$media_directory\"? [y/N]: " media_directory_correct +media_directory_correct=${media_directory_correct:-"n"} + +if [ ! -d "$media_directory" ]; then + echo "The directory \"$media_directory\" does not exists. Attempting to create..." + if mkdir -p "$media_directory"; then + send_success_message "Directory $media_directory created ✅" + else + send_error_message "There was an error creating the installation directory at \"$media_directory\". Make sure you have the necessary permissions ❌" + fi +fi + +if [ "$media_directory_correct" == "n" ]; then + send_error_message "Media directory is not correct. Please fix it and run the script again ❌" +fi + +echo -e "\n\n\nTime to choose your media service." +echo "Your media service is responsible for serving your files to your network." +echo "By default, YAMS supports 3 media services:" +echo "- jellyfin (recommended, easier)" +echo "- emby" +echo "- plex (advanced, always online)" + +read -p "Choose your media service [jellyfin]: " media_service +media_service=${media_service:-"jellyfin"} +media_service=$(echo "$media_service" | awk '{print tolower($0)}') + +media_service_port=8096 +if [ "$media_service" == "plex" ]; then + media_service_port=32400 +fi + +if echo "emby plex jellyfin" | grep -qw "$media_service"; then + echo -e "\nYAMS is going to install \"$media_service\" on port \"$media_service_port\"" +else + send_error_message "\"$media_service\" is not supported by YAMS. Are you sure you chose the correct service?" +fi + +echo -e "\nTime to set up the VPN." +echo "You can check the supported VPN list here: https://yams.media/advanced/vpn." + +read -p "Do you want to configure a VPN? [Y/n]: " setup_vpn +setup_vpn=${setup_vpn:-"y"} + +if [ "$setup_vpn" == "y" ]; then + read -p "What's your VPN service? (with spaces) [mullvad]: " vpn_service + vpn_service=${vpn_service:-"mullvad"} + + echo -e "\nYou should read $vpn_service's documentation in case it has different configurations for username and password." + echo "The documentation for $vpn_service is here: https://github.com/qdm12/gluetun-wiki/blob/main/setup/providers/${vpn_service// /-}.md" + + read -p "What's your VPN username? (without spaces): " vpn_user + + unset vpn_password + charcount=0 + prompt="What's your VPN password? (if you are using mullvad, just enter your username again): " + while IFS= read -p "$prompt" -r -s -n 1 char + do + if [[ $char == $'\0' ]] + then + break + fi + if [[ $char == $'\177' ]] ; then + if [ $charcount -gt 0 ] ; then + charcount=$((charcount-1)) + prompt=$'\b \b' + vpn_password="${vpn_password%?}" + else + prompt='' + fi + else + charcount=$((charcount+1)) + prompt='*' + vpn_password+="$char" + fi + done + echo +fi + +echo "Configuring the docker-compose file for the user \"$username\" on \"$install_directory\"..." + +copy_files=( + "docker-compose.example.yaml:$filename" + ".env.example:$env_file" + "docker-compose.custom.yaml:$custom_file_filename" +) + +for file_mapping in "${copy_files[@]}"; do + source_file="${file_mapping%%:*}" + destination_file="${file_mapping##*:}" + + echo -e "\nCopying $source_file to $destination_file..." + if cp "$source_file" "$destination_file"; then + send_success_message "$source_file was copied successfuly! ✅" + else + send_error_message "Failed to copy $source_file to $destination_file. Ensure your user ($USER) has the necessary permissions ❌" + fi +done + +sed -i -e "s||$puid|g" "$env_file" \ + -e "s||$pgid|g" "$env_file" \ + -e "s||$media_directory|g" "$env_file" \ + -e "s||$media_service|g" "$env_file" \ + -e "s||$media_service|g" "$filename" + +if [ "$media_service" == "plex" ]; then + sed -i -e "s|#network_mode: host # plex|network_mode: host # plex|g" "$filename" +fi + +sed -i -e "s||$install_directory|g" "$env_file" + +if [ "$setup_vpn" == "y" ]; then + sed -i -e "s||$vpn_service|g" "$env_file" \ + -e "s||$vpn_user|g" "$env_file" \ + -e "s||$vpn_password|g" "$env_file" \ + -e "s||$setup_vpn|g" "$env_file" \ + -e "s|#network_mode: \"service:gluetun\"|network_mode: \"service:gluetun\"|g" "$filename" \ + -e "s|ports: # qbittorrent|#port: # qbittorrent|g" "$filename" \ + -e "s|- 8080:8080 # qbittorrent|#- 8080:8080 # qbittorrent|g" "$filename" \ + -e "s|#- 8080:8080/tcp # gluetun|- 8080:8080/tcp # gluetun|g" "$filename" +fi + +sed -i -e "s||$filename|g" yams \ + -e "s||$custom_file_filename|g" yams \ + -e "s||$install_directory|g" yams + +send_success_message "Everything installed correctly! 🎉" + +echo "Running the server..." +echo "This is going to take a while..." + +docker-compose -f "$filename" up -d + +echo -e "\nWe need your sudo password to install the YAMS CLI and configure permissions..." + +if sudo cp yams /usr/local/bin/yams && sudo chmod +x /usr/local/bin/yams; then + send_success_message "YAMS CLI installed successfully ✅" +else + send_error_message "Failed to install YAMS CLI. Make sure you have the necessary permissions ❌" +fi + +if sudo chown -R "$puid":"$pgid" "$media_directory"; then + send_success_message "Media directory ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the media directory. Check permissions ❌" +fi + +if sudo chown -R "$puid":"$pgid" "$install_directory"; then + send_success_message "Install directory ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the install directory. Check permissions ❌" +fi + +if [[ -d "$install_directory/config" ]]; then + send_success_message "Configuration folder \"$install_directory/config\" exists ✅" +else + if sudo mkdir -p "$install_directory/config"; then + send_success_message "Configuration folder \"$install_directory/config\" created ✅" + else + send_error_message "Failed to create or access the configuration folder. Check permissions ❌" + fi +fi + +if sudo chown -R "$puid":"$pgid" "$install_directory/config"; then + send_success_message "Configuration folder ownership and permissions set successfully ✅" +else + send_error_message "Failed to set ownership and permissions for the configuration folder. Check permissions ❌" +fi + +printf "\033c" + +echo "========================================================" +echo " _____ ___ ___ ___ " +echo " / /::\ / /\ /__/\ / /\ " +echo " / /:/\:\ / /::\ \ \:\ / /:/_ " +echo " / /:/ \:\ / /:/\:\ \ \:\ / /:/ /\ " +echo " /__/:/ \__\:| / /:/ \:\ _____\__\:\ / /:/ /:/_ " +echo " \ \:\ / /:/ /__/:/ \__\:\ /__/::::::::\ /__/:/ /:/ /\\" +echo " \ \:\ /:/ \ \:\ / /:/ \ \:\~~\~~\/ \ \:\/:/ /:/" +echo " \ \:\/:/ \ \:\ /:/ \ \:\ ~~~ \ \::/ /:/ " +echo " \ \::/ \ \:\/:/ \ \:\ \ \:\/:/ " +echo " \__\/ \ \::/ \ \:\ \ \::/ " +echo " \__\/ \__\/ \__\/ " +echo "========================================================" +send_success_message "All done!✅ Enjoy YAMS!" +echo "You can check the installation on $install_directory" +echo "========================================================" +echo "Everything should be running now! To check everything running, go to:" +echo +running_services_location +echo +echo +echo "You might need to wait for a couple of minutes while everything gets up and running" +echo +echo "All the services location are also saved in ~/yams_services.txt" +running_services_location > ~/yams_services.txt +echo "========================================================" +echo +echo "To configure YAMS, check the documentation at" +echo "https://yams.media/config" +echo +echo "========================================================" +exit 0 diff --git a/yams b/yams index 7ca1622..db49e83 100755 --- a/yams +++ b/yams @@ -2,7 +2,8 @@ set -euo pipefail -dc="docker-compose -f " +dc="docker-compose -f -f " +install_location="" option=${1:-"--help"} @@ -17,40 +18,41 @@ help() { echo "start starts yams services" echo "destroy destroy yams services so you can start from scratch" echo "check-vpn checks if the VPN is working as expected" + echo "update updates YAMS" } send_success_message() { - echo -e $(printf "\e[32m$1\e[0m") + echo -e "$(printf "\e[32m$1\e[0m")" } send_error_message() { - echo -e $(printf "\e[31m$1\e[0m") + echo -e "$(printf "\e[31m$1\e[0m")" exit 255 } -if [ $option == "--help" ]; then +if [ "$option" == "--help" ]; then help exit 0 fi -if [ $option == "restart" ]; then +if [ "$option" == "restart" ]; then $dc stop && $dc up -d echo "YAMS is starting. Wait 1 min until all the services are up and running..." exit 0 fi -if [ $option == "stop" ]; then +if [ "$option" == "stop" ]; then $dc stop exit 0 fi -if [ $option == "start" ]; then +if [ "$option" == "start" ]; then $dc up -d echo "YAMS is starting. Wait 1 min until all the services are up and running..." exit 0 fi -if [ $option == "check-vpn" ]; then +if [ "$option" == "check-vpn" ]; then echo "Getting your qBittorrent IP..." qbittorrent_ip=$(docker exec qbittorrent sh -c "curl -s ifconfig.me"); echo "$qbittorrent_ip" @@ -61,19 +63,19 @@ if [ $option == "check-vpn" ]; then echo "$your_ip" echo "Your local IP country is $(curl -s https://am.i.mullvad.net/country)" echo - if [ $qbittorrent_ip == $your_ip ]; then + if [ "$qbittorrent_ip" == "$your_ip" ]; then send_error_message "Your IPs are the same! qBittorrent is NOT working! ⚠️" else send_success_message "Your IPs are different. qBittorrent is working as expected! ✅ " fi fi -if [ $option == "destroy" ]; then +if [ "$option" == "destroy" ]; then echo echo read -p "Are you sure you want to destroy all your yams services? THIS IS NOT RECOVERABLE! ⚠️ ️🚨 [y/N]: " destroy_now destroy_now=${destroy_now:-"n"} - if [ $destroy_now == "y" ]; then + if [ "$destroy_now" == "y" ]; then $dc down echo echo @@ -81,3 +83,31 @@ if [ $option == "destroy" ]; then echo "\$ yams start" fi fi + +if [ "$option" == "update" ]; then + echo "Updating YAMS..." + $dc stop + rm -rf /tmp/yams && mkdir /tmp/yams + wget https://gitlab.com/rogs/yams/-/raw/master/docker-compose.example.yaml -O /tmp/yams/docker-compose.example.yml > /dev/null 2>&1 + source $install_location/.env + + filename="$install_location/docker-compose.yaml" + + cp /tmp/yams/docker-compose.example.yml $filename + + + sed -i -e "s;;$MEDIA_SERVICE;g" "$filename" + if [ "$MEDIA_SERVICE" == "plex" ]; then + sed -i -e "s;#network_mode: host # plex;network_mode: host # plex;g" "$filename" + fi + + if [ "$VPN_ENABLED" == "y" ]; then + sed -i -e "s;#network_mode: \"service:gluetun\";network_mode: \"service:gluetun\";g" "$filename" \ + -e "s;ports: # qbittorrent;#port: # qbittorrent;g" "$filename" \ + -e "s;- 8080:8080 # qbittorrent;#- 8080:8080 # qbittorrent;g" "$filename" \ + -e "s;#- 8080:8080/tcp # gluetun;- 8080:8080/tcp # gluetun;g" "$filename" + fi + + $dc up -d + echo "YAMS was updated and it is starting. Wait 1 min until all the services are up and running..." +fi